English  |
| Quantity: | |
|---|---|
FST-C-36150-3AF
FIRST POWER
Lithium-ion
On Board
CE, UL, FCC, C-Tick, CSA
Forklift
3P220VAC
36V
Product Advantage
1.This charger is certified with CE, UL, FCC, CSA, KC etc, and complies with relevant requirements for electromagnetic compatibility and safety.
2.Touch and leakage current values remain within required limits, without further measures.
3.The power factor is 0.99, therefore the available mains power is used to the maximum.
4.The charging current contains a very low ripple.
5.Charging from single or three-phase outlet.
6.Parallel connection of several chargers is possible, in order to achieve higher charging power.
7.Highly efficient (Max 95%).
8.Core Power Module is IP 67 Protection level, robust against dust, humidity, vibration etc.
Dimension：
Specifications:
Model | FST-C-36150-3AF | |
Rated Input Voltage Range | 3P 220VAC 1P 85-277VAC | |
Rated input frequency | 45-65Hz | |
Input power | ≤10.6KVA | |
Input current(Max) | 31A @3P220VAC 29A @3P220VAC 31A @1P85-277VAC | |
Maximum conversion efficiency | ≥95% | |
Rated output voltage | 36V | |
Max output current | 150A | |
Output voltage range | 15-48VDC | |
Max output power | 10KW | |
Communication | CAN BUS | |
Cooling method | Fans cooling | |
Operating temperature | -30°C to 50°C. Over 50 °C Derate | |
Relative humidity | 0%-95% | |
Protection level | IP67 | |
Noise | ≤20dB | |
Altitude | Below 2000m. | |
Weight | 10KG | |
Basic Function
The First Power OBC converts three-phase alternating current into direct current, providing galvanic isolation between the public AC grid and the industrial fleet's DC system. This setup enables battery charging while ensuring the safety of both grids. Battery charging is managed via a CAN interface, with the charger regulating current and voltage based on CAN-received values. To protect the battery, the unit halts charging if it does not receive signals for approximately 0.2 seconds.
Our on-board charger is the ultimate solution for maintaining your industrial fleet's power and readiness. With advanced charging technology, it delivers rapid and efficient charging, ensuring your batteries are fully charged in no time. Built to endure, this charger features rugged construction and high-quality components designed to withstand the harshest environments. For a reliable and efficient way to keep your forklifts and aerial work platforms operating smoothly, our on-board charger is the perfect choice. Order yours today to experience its unmatched power and performance!
Product Advantage
1.This charger is certified with CE, UL, FCC, CSA, KC etc, and complies with relevant requirements for electromagnetic compatibility and safety.
2.Touch and leakage current values remain within required limits, without further measures.
3.The power factor is 0.99, therefore the available mains power is used to the maximum.
4.The charging current contains a very low ripple.
5.Charging from single or three-phase outlet.
6.Parallel connection of several chargers is possible, in order to achieve higher charging power.
7.Highly efficient (Max 95%).
8.Core Power Module is IP 67 Protection level, robust against dust, humidity, vibration etc.
Dimension：
Specifications:
Model | FST-C-36150-3AF | |
Rated Input Voltage Range | 3P 220VAC 1P 85-277VAC | |
Rated input frequency | 45-65Hz | |
Input power | ≤10.6KVA | |
Input current(Max) | 31A @3P220VAC 29A @3P220VAC 31A @1P85-277VAC | |
Maximum conversion efficiency | ≥95% | |
Rated output voltage | 36V | |
Max output current | 150A | |
Output voltage range | 15-48VDC | |
Max output power | 10KW | |
Communication | CAN BUS | |
Cooling method | Fans cooling | |
Operating temperature | -30°C to 50°C. Over 50 °C Derate | |
Relative humidity | 0%-95% | |
Protection level | IP67 | |
Noise | ≤20dB | |
Altitude | Below 2000m. | |
Weight | 10KG | |
Basic Function
The First Power OBC converts three-phase alternating current into direct current, providing galvanic isolation between the public AC grid and the industrial fleet's DC system. This setup enables battery charging while ensuring the safety of both grids. Battery charging is managed via a CAN interface, with the charger regulating current and voltage based on CAN-received values. To protect the battery, the unit halts charging if it does not receive signals for approximately 0.2 seconds.
Our on-board charger is the ultimate solution for maintaining your industrial fleet's power and readiness. With advanced charging technology, it delivers rapid and efficient charging, ensuring your batteries are fully charged in no time. Built to endure, this charger features rugged construction and high-quality components designed to withstand the harshest environments. For a reliable and efficient way to keep your forklifts and aerial work platforms operating smoothly, our on-board charger is the perfect choice. Order yours today to experience its unmatched power and performance!
